New Pool Start-Up One Time Service
- Fill day - Test fill water. Pool fill with clean potable water. Start the filtration system as soon as possible after the pool has been filled.
- 1st Day - Test pH, calcium hardness & metals. Adjust levels accordingly. Brush the entire surface twice daily for the first four days. Operate system continuously for first 72 hrs.
- 2nd Day - Repeat first day. With alkalinity and pH in check 7.2 to 7.6 adjust calcium hardness to min. 150 ppm.
- 3rd Day - Repeat items 1 and 2. Now diluted chlorine may be added to the pool to 1.5 to 3 ppm.
On 4th -28th day, Test pH, Carbonate Alkalinity and Calcium Hardness, repeat NPC steps 1 through 5 once daily through day 14. Adjust calcium slowly to 200 ppm over 28 days. Adjust cyanuric acid level to 30-50 ppm based on primary sanitizer. On the 7th day brush vacuum to remove any remaining plaster dust. Day 5 through day 14 is performed under a 12-month service contract with the homeowner.
Place your order online now! Our One-Time Services are guaranteed to meet your satisfaction. Your online payment of this service will not be debited until we have finished the job.